Cast alloy wheels manufacturer by Jjjwheel

Gravity cast wheels provider today: Unleash Performance: Ultimate Guide to Wheel Height & Offset! The importance of wheel height and offset. When shopping for car wheels, in addition to focusing on appearance and styling, the height and offset of the wheels are also very important factors. So, what exactly does the height and offset of a wheel mean? Firstly, the height of a wheel is the distance from the centre of the wheel to the rim, usually measured in inches or millimetres. It determines the area of the tyre in contact with the ground, which in turn has an impact on the vehicle’s handling, comfort and fuel economy. Generally speaking, low-height wheels are suitable for city driving, while high-height wheels are better suited for off-road conditions. Read additional details at custom alloys supplier.

Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.

Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.

One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.

Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel.

Cast aluminum wheels ultimately need to be processed by CNC machine tools, so no matter the roundness, end direction and radial accuracy of the wheels, they are not comparable to traditional rolled steel rings. The dimensional accuracy of the wheels directly affects the driving performance of the vehicle. Especially for high-speed vehicles, it is more prominent, such as the grip, yaw and stability of the whole vehicle during driving, and braking in case of an accident. The high speed and smooth driving of the car.

Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems. Find extra information at https://www.jjjwheel.com/.

JWheel’s flow-formed wheels are designed with the utmost attention to detail and quality. Here are some of the top features that set them apart from the competition: Material Quality – We pride ourselves on using only the best materials for flow-formed wheels. Our premium aluminum alloy is rigorously tested and selected for its exceptional durability and lightweight design. This high-quality material ensures that our wheels perform at the highest level, even under the most demanding driving conditions. We understand that drivers want not only a functional product but one that also looks great. Our premium aluminum alloy provides the perfect balance of form and function, giving our customers a superior product that will last for years to come.