Quality disc bowl centrifuge manufacturer and supplier

Premium industrial centrifuge wholesale manufacturer and supplier: The use of three-phase separation technologies is rising in the separation industry. When it came to separating oils and water, the industry particularly needed high-efficiency three-phase decanter centrifuges. Shenzhou Machinery Company has over 50 years of experience in the separation field, which they used to develop the 3 Phase decanter centrifuge. Its primary use is in solving the problem of simultaneous immiscible liquid and solid phase separation using the specific gravity difference. The need for stable, continuous operation around the clock can be met by the 3 Phase decanter centrifuge thanks to its mature design and high-quality raw material selection. Discover more details at disc centrifuge.

The advantages of centrifugal casting – Using centrifugal casting, parts have greater strength because grain structures are denser. Its mechanical properties are almost equal in all directions, as the process allows for more control over directional solidification. As a result of this increased structural density, the component has a longer life span and is more stress tolerant. The improved structural uniformity and reduced internal porosity of the components also contribute to enhanced part strength.

This drive system can not only maintain the hydraulic system to withstand high torque, but also achieve more precise differential speed and minimize or even eliminate peak starting current and vibration. Specifically, when starting the centrifuge, the screw is first started, which can eliminate any residual substances that may have been left during the previous operation and avoid the possibility of large startup vibrations caused by uneven distribution of residues during the rotary drum startup; At the same time, when shutting down the machine, first reduce the speed of the rotary drum, and then continue to discharge residual substances from the machine through the screw. This system, which drives the drum and screw separately and independently, can also start the screw separately when the machine is blocked, and discharge residual substances that remain inside the machine at low speeds, thereby simplifying the maintenance and repair process.

The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.

High Speed Tubular Centrifuge, also called Tubular Bowl Separator or tubular bowl centrifuge, is a kind of fine separation equipment suitable for suspensions with thin concentration, fine particles, and small density difference solid-liquid separation, or liquid-liquid-solid separation. It is indispensable equipment for pharmaceutical, food, chemical, biological product, fermentation broth, beverages, blood products and other industries. High Speed Tubular Centrifuge working principle is that materials with different specific gravity are subject to different centrifugal forces when rotating at high speed, so as to achieve the purpose of separation. See additional details at https://www.lnszjx.com/.

The structure and working principle of a Decanter centrifuge – The Decanter centrifuge relies on the density difference between solid and liquid phases, and under the action of centrifugal force, accelerates the settling speed of solid particles to achieve solid-liquid separation. There is a conical section designed in front of the drum, which rotates at a set speed according to the different properties of the material. The material rotates at the design speed on the inner wall of the drum, forming a concentric liquid layer along the drum shell, called the liquid ring layer. The solids contained in the material are deposited onto the wall of the drum under the action of centrifugal force, and then the dry material is pushed out of the drum through spiral operation. The operating speed of the drum directly determines the separation factor, while the speed difference of the screw directly affects the solid moisture content transported outside the drum. It has a direct impact on processing capacity, residence time, and solid discharge.