Stone retaining wall building tips

Limestone retaining wall repair recommendations: NFC can either be mixed on-site for smaller areas or purchased from a reputable concrete supplier and trucked in for larger commercial applications. NFC is mixed at a 6:1 ratio by volume of 20mm max size clean aggregate and cement. Water content should be such that the cement slurry evenly coats the aggregate and retains a wet/glossy appearance without excess slurry running off, this is typically around 40 litres per 100kg of cement. With the use of NFC, we are able to build Block Retaining Walls in areas and situations where normal construction methods would not work. Some of these situations are: In areas where excavation behind the wall is limited either due to being on a boundary or close to other structures or footings.

Which retaining wall blocks are best? These solid blocks are heavy. Lighter, hollow blocks are available, but they can’t be split because cutting them will expose the voids. Also, some hollow blocks require individual backfilling, which is time consuming. These pros prefer Versa-Lok blocks, which are held together with pins rather than a lip on the bottom because pinned blocks work better on tighter curves, and the flat bottom makes them easier to stack. They have also found that the small back lip on some lipped blocks can be prone to cracking, which will weaken the wall.

Reducing soil erosion, turning steep slopes into terraced backdrops, creating focal points in the landscape—retaining walls serve many purposes. Indeed, they are some of the most common ways to correct problems caused by hilly areas! Well-built retaining walls transform unworkable inclines into usable outdoor space for the garden. Despite their simple appearance, though, these walls require a good deal of planning—sometimes professional engineering—to keep their shape. Soil is heavy, especially when soaking wet from a recent rainstorm, so a basic retaining wall (four feet tall and 15 feet long) potentially has to support up to 20 tons of soil pressure. With every additional foot of height, the pressure of the soil increases substantially. Miscalculate your construction plans, and you could end up with a weak wall that risks bulging or, worse, collapsing altogether. For just this reason, retaining walls taller than four feet should be designed and constructed by the pros.

No matter if you choose to build your retaining wall out of block, brick, stone, wood or concrete, the goal should be to integrate the retaining wall into your landscape. The angle of a sloping lawn should never be greater than 45 degrees, and the gentler the slope, the better. The higher the wall, the gentler the slope will be. After determining the wall height, check local building codes. Many municipalities require a building permit and an engineer’s approval before a wall higher than 3 feet can be built. For taller projects, some careful engineering is required to construct a sturdy, long-lasting wall. Find additional information on Best Retaining Walls Colorado.

We also repair existing retaining walls. Many railroad tie walls or older concrete retaining walls which may or may not include rocks or boulders are beginning to show signs of failure. Often times a homeowner will build a DIY retaining wall that needs help after years of service. We serve all of Colorado out of our home office in Colorado Springs. Please feel free to reach out to us with any questions you may have. Estimates are always free and everything we touch comes with a warranty.