Premium induction furnace manufacturer

Best pwht machine manufacturer? Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, through heat generated in the object by eddy currents. An induction heater consists of an electromagnet and an electronic oscillator that passes a high-frequency alternating current (AC) through the electromagnet. The rapidly alternating magnetic field penetrates the object, generating electric currents inside the conductor, called eddy currents.

The three main components of the machine are the power supply, the ZVS driver, and the working coil. The ZVS driver,(Zero Voltage Switching) was invented by Vladmiro Mazilli. It uses resonant zero voltage switching (also know as ZVS) to pulse the power supply very rapidly. This means the MOSFET’s are designed to switch (on or off) when the voltage across them becomes zero. Since the MOSFET’s switch when there is no voltage across them, they generate very little heat. The main source of heat is caused by the MOSFET’s internal resistance and the capacitors constantly charging and discharging. The circuit is fairly simple consists of just two MOSFETs, 6 capacitors, and a few resistors and diodes. You can build the circuit yourself, but it is cheaper to buy a premade board.

MYF melting furnace is designed for Non-ferrous metal melting. Which is used for copper, aluminum, zinc, tin and lead melting. The induction power is 40KW-600KW. The induction heating power and melting furnace are equipped with water cooling system. The air cooling ones will need customization. The graphite crucible furnace capacity is 100-1000kg copper or equivalent. In general, it will cost 300-350KW*H electric power to melt 1MT aluminum. The input power is 3 x 380V, 50/60HZ. Air cooling or water cooling induction melting furnace. More saving for the electrical power. Easy to operate and more stable for 24 hours working. Read more information on pwht machine.

Gears, Firing pins, Engine Camshafts, Lock Shackles, Security Fasteners, and Self Drilling Screws are all commonly case hardened. The method of case hardening used in the video is also known as carburizing with a cryogenic treatment. Liquid nitrogen is usually used but I used a isopropyl alcohol dry ice bath. Liquid nitrogen would provide even more benefits by converting even more retained austenite to martensite. Also, if you don’t mind the darkness of the part after the hardening process, it’s best not to polish it for even more rust protection. The method used in the video can be repeated multiple times until the desired hardness is achieved.

Qingdao Shuimu Induction Equipment Co., Ltd is a professional induction heating equipment manufacturer in Qingdao City, China from 1999. Our induction weld preheating PWHT machine specializes in Metal Weld Heating, post Weld Heat Treatment(PWHT), thermal Assembly, fluid Heating and Non-ferrous Metal Melting Furnace design and manufacture. The induction weld preheating PWHT machine is air cooling with DSP + PLC control. Can set the heating temperature, heating speed and cooling speed. MYF Melting Furnace is designed for Non-ferrous Metal Melting. Which is used for Copper, Aluminum, Zinc, Tin and Lead melting. The power size is 40KW-600KW. See extra info at https://www.cmheat.com/.